Стаття

Отримано 16.08.2023

Доопрацьовано 01.12.2023

Прийнято 28.12.2023

Взято з Вип. 114, Ч. 2, 2023

Сторінки 164 -183

Нarkusha, M. (2023). APPROACHES FOR DETERMINING RELIABILITY OF CULVERTS OF METAL CORRUGATED STRUCTURES FROM POSITION OF CORROSIONINFLUENCE. Automobile Roads and Road Construction, (114.2), 164-183. https://doi.org/10.33744/0365-8171-2023-114.2-164-183

ПІДХОДИ ВИЗНАЧЕННЯ НАДІЙНОСТІ ДОРОЖНІХ ВОДОПРОПУСКНИХ ТРУБ З МЕТАЛЕВИХ ГОФРОВАНИХ КОНСТРУКЦІЙ З ПОЗИЦІЇ ВПЛИВУ КОРОЗІЇ

Микола Гаркуша

Дорожні водопропускні труби з металевих гофрованих конструкцій все частіше застосовуються в транспортному будівництві України. Одним із основних чинників, що впливає на довговічність дорожньої водопропускної труби є корозія металу самої труби. Корозійні пошкодження є надзвичайно важливою проблемою і вимагають належної реакції на дуже ранній стадії розвитку. Пошкодження в більшості випадків незворотні, особливо коли вони відбуваються зі сторони ґрунту. Визначення довговічності також має враховувати витрати на технічне обслуговування, які необхідно враховувати у зв’язку з вартістю заміни конструкції. У статті розглянуо вплив середовища на корозію дорожньої водопропускної труби з металевих гофрованих конструкцій та запропоновано підхід з визначення надійності та довговічності дорожньої водопропускної труби

автомобільна дорога, гідротехнічні споруди, дорожній одяг, дорожня водопропускна труба, корозія, транспортна споруда
  1. Onyshchenko, A.M., Harkusha, M.V., & Klymenko, M.I. (2022). Analysis of problems of ensuring reliability and durability of hydraulic structures of transport construction from road culverts under operating conditions. Roads and Bridges, 25, 190-202. doi: 10.36100/dorogimosti2022.25.190.
  2. Onyshchenko, A.M., Harkusha, M.V., & Klymenko, M.I. (2022). Analysis of the technical condition of hydraulic structures of transport construction from road culverts affected by corrosion. Highways and Road Construction, 111, 164-173. doi: 10.33744/0365-8171-2022-111-164-173.
  3. West, A., Williams, K., Villeneuve, D., & Carroll, P. (2012). Added longevity with thermoplastic polymer coated structural steel plate. Ontario: Atlantic Industries.
  4. Harkusha, M.V. (2023). Impact of damaged hydraulic structures of transport construction from road culverts on the environment. In Proceedings of the V international scientific and technical conference “Water supply and sewerage: Design, construction, operation, monitoring” (pp. 82-83). Lviv: Lviv Polytechnic National University.
  5. Meegoda, J.N., Juliano, T.M., & Tang, C. (2009). Culvert information management system – demonstration project. Newark, NJ: New Jersey Institute of Technology.
  6. BMROSS. (2012). City of Ottawa Ottawa Road 174 at Jeanne D’Arc pipe collapse root cause analysis report. Ottawa.
  7. Boyajian, D., Maalouf, S., Zirakian, T., & CSUN Student Researchers. (2019). California corrugated steel pipe (CSP) culvert service life. Sacramento, CA: California Department of Transportation.
  8. WRc. (2001). Sewerage rehabilitation manual. Swindon: WRc Publications.
  9. Corrugated Steel Pipe Institute. (2009). Handbook of steel drainage & highway construction products (2nd Canadian ed.). Canada: American Iron and Steel Institute.
  10. Spangler, M.G. (1941). The structural design of flexible pipe culverts (Bulletin 153). Ames, IA: Iowa Engineering Experiment Station.
  11. Beaton, J., & Stratfull, R. (1962). Field test for estimating service life of corrugated metal pipe culverts. Highway Research Board Proceedings, 41.
  12. American Association of State Highway and Transportation Officials (AASHTO). (2007). Highway drainage guidelines (4th ed.). Washington, DC: AASHTO.
  13. Gabriel, L.H., & Moran, E.T. (1998). Service life of drainage pipe. Washington, DC: Transportation Research Board.
  14. Chaker, V. (1990). Corrosion testing in soils – past, present, and future. In Corrosion testing and evaluation: Silver anniversary volume (pp. 95-111). West Conshohocken, PA: ASTM International.
  15. Modern sewer design (3rd ed.). (1995). Washington: American Iron and Steel Institute. 
  16. Maher, M., Hebeler, G., & Fuggle, A. (2015). Service life of culverts. Washington, DC: Transportation Research Board. 
  17. Beben, D. (2015). Backfill corrosivity around corrugated steel plate culverts. Journal of Performance of Constructed Facilities, 29(6).
  18. Chaker, V. (1990). Corrosion testing in soils – past, present, and future. In Corrosion testing and evaluation: Silver anniversary volume (pp. 95-111). West Conshohocken, PA: ASTM International.
  19. California Department of Transportation. (2013). Caltrans supplement to FHWA culvert repair practices manual (Design Information Bulletin No. 83-03). Sacramento, CA: Caltrans.
  20. California Department of Transportation, Division of Construction. (1978). Method for estimating the service life of steel culverts: California Test 643. Sacramento, CA: Caltrans.
  21. Bradford, S.A. (2000). The practical handbook of corrosion control in soils. 
  22. Hepfner, J.J. (2001). Statewide corrosivity study on corrugated steel culvert pipe.
  23. National Corrugated Steel Pipe Association. (2008). NCSPA corrugated steel pipe design manual. Dallas, TX: National Corrugated Steel Pipe Association.
  24. Federal Highway Administration. (1979). Corrugated pipe durability guidelines (Technical Advisory T 5040.12). Washington, DC: FHWA. 
  25. West, A., Williams, K., Villeneuve, D., & Carroll, P. (2012). Added longevity with thermoplastic polymer coated structural steel plate. Ontario: Atlantic Industries.
  26. Corrugated Steel Pipe Institute. (2011). Canadian performance guideline for structural plate corrugated steel pipe and deep corrugated structural plate structures (Technical Bulletin, Issue Thirteen, October 24, 2011). Cambridge, ON, Canada.
  27. Ault, P. (2012). White paper: Performance guideline for buried steel structures. Ocean City, NJ: Elzly Technology Corporation.
  28. AASHTO M 218. (n.d.). Standard specification for steel sheet, zinc-coated (galvanized), for corrugated steel pipe. Washington, DC: American Association of State Highway and Transportation Officials.
  29. AASHTO M 274. Standard specification for steel sheet, aluminum-coated (Type 2), for corrugated steel pipe. Washington, DC: American Association of State Highway and Transportation Officials.
  30. Berry, I. (2012). Uniquely engineered coating for storm sewers and culverts. Presentation at Warner Custom Coating, Guelph, ON, Canada.
  31. Alamilla, J.L., Espinosa-Medina, M.A., & Sosa, E. (2009). Modelling steel corrosion damage in soil environment. Corrosion Science, 51, 2628-2638.
  32. VBN V.2.3-218-198:2007. (2007). Transport structures. Design and construction of structures from corrugated metal structures on public highways. Kyiv: State Road Agency of Ukraine.
  33. Beben, D. (2020). Soil-steel bridges: Geotechnical, geological and earthquake engineering. Cham: Springer. doi: 10.1007/978-3-030-34788-8.
  34. Jones, R.H., & Ricker, R.E. (2017). Mechanisms of stress-corrosion cracking. In R.H. Jones (Ed.), Stress-corrosion cracking: Materials performance and evaluation (2nd ed.). Materials Park, OH: ASM International. doi: 10.31399/asm.tb.sccmpe2.9781627082662.
  35. Orlikowski, J. (2008). Corrosive cracking. In K. Darowicki (Ed.), Corrosion processes. Gdansk: Gdansk University of Technology Publisher.
  36. Buck, O., & Ranjan, R. (1986). Evaluation of a crack-tip-opening displacement model under stress-corrosion conditions. In R.H. Jones & W.W. Gerberich (Eds.), Modelling environmental effects on crack growth processes. Warrendale, PA: The Metallurgical Society.
  37. Stachowiak, A., & Zwierzycki, W. (2007). Predicting the propagation rate of corrosion-fatigue cracks. Op Probl, 4, 233-240.
  38. Elsayed, E.A. (1996). Reliability engineering. Reading, MA: Addison-Wesley Longman.
  39. Burn, L.S., Eiswirth, M., DeSilva, D., & Davis, P. (2001). Condition monitoring and its role in asset planning. In Pipes Wagga Wagga 2001. Wagga Wagga.
  40. Molinas, A., & Mommandi, A. (2009). Development of new corrosion/abrasion guidelines for selection of culvert pipe materials. Retrieved from https://hermes.cde.state.co.us/islandora/object/co%3A8010/datastream/OBJ/download/Development_of_new_corrosion_abrasion_guidelines_for_selection_of_culvert_pipe_materials.pdf.
  41. Kaplan, E.L., & Meier, P. (1958). Nonparametric estimation from incomplete observations. Journal of the American Statistical Association, 53, 457-481. https://doi.org/10.1080/01621459.1958.10501452

https://doi.org/10.33744/0365-8171-2023-114.2-164-183